Tube Clamp 2 Socket Cross 119
Tube Clamp 2 Socket Cross / Q Clamp 119
Please make your selection below from the following options.
- Additional Information
- Size Guide
A 90 degree joint between a vertical and two horizontals. Typical use on for the tube clamp 2 socket cross is on a straight and level handdrail – to connect the mid/lower rails to the upright. The vertical tube must remain continuous with cross rails cut. Normally the tube clamp 2 socket cross is used in conjunction with the tube clamp long tee (q clamp 104) fitting.
Simple and Cost Effective
Tube Clamps are a simple and cost effective way of creating an endless variety of tubular structures without the need for welding.
Our extensive range of handrail fittings when combined with standard EN10255 tubing enables the user to create any structure imaginable for use in all manner of industries.
Tube Clamp fittings are a blackheart malleable iron casting manufactured to BS EN 1562:1997 using grade B32-10 material with a hot dipped galvanised finish to BS EN 1461:1999
All Tube Clamp fitting are supplied with stainless steel grub screws. In order to protect any exposed threads in outdoor installations, we recommend the use of an anti-corrosion galvanising spray such as the one sold as part of our Tube Clamp range. The grub screws can be tightened with an Allen key, however, if fully tightened using a ratchet key to a torque of 4.1kg/m (29ft/lb) the grub screw is capable of withstanding an applied slip load of 900kg.
119-1 – 27mm, 119-2 – 34mm, 119-3 – 42mm, 119-4 – 48mm, 119-5 – 60mm
|Q CLAMP REF No.||A||B||C||D||E||F||G||HOLE DIA mm||WEIGHT (kgs)|